EasyManua.ls Logo

Autel MaxiIM IM608 User Manual

Autel MaxiIM IM608
200 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
i
Trademarks
Autel
®
and MaxiIM
®
are trademarks of Autel Intelligent Technology Corp., Ltd.,
registered in China, the United States and other countries. All other marks
are trademarks or registered trademarks of their respective holders.
Copyright Information
No part of this manual may be reproduced, stored in a retrieval system or
transmitted, in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise without the prior written permission of
Autel.
Disclaimer of Warranties and Limitation of Liabilities
All information, specifications and illustrations in this manual are based on
the latest information available at the time of printing.
Autel reserves the right to make changes at any time without notice. While
information of this manual has been carefully checked for accuracy, no
guarantee is given for the completeness and correctness of the contents,
including but not limited to the product specifications, functions, and
illustrations.
Autel will not be liable for any direct, special, incidental, indirect damages or
any economic consequential damages (including the loss of profits).
IMPORTANT
Before operating or maintaining this unit, please read this manual carefully,
paying extra attention to the safety warnings and precautions.
For Services and Support
www.autel.com
support@autel.com
For technical assistance in all other markets, please contact your local selling
agent.
Question and Answer IconNeed help?

Do you have a question about the Autel MaxiIM IM608 and is the answer not in the manual?

Autel MaxiIM IM608 Specifications

General IconGeneral
RAM2GB
Operating SystemAndroid
ConnectivityWi-Fi, Bluetooth, USB
SensorsAccelerometer, Gyroscope
Audio Input/OutputMicrophone
Input Voltage12V DC
Operating Temp0 to 50°C (32 to 122°F)
Storage Temp-20 to 60°C (-4 to 140°F)
ProtocolsISO9141
FunctionsDiagnostics, coding, programming, key programming

Summary

Safety Information

Safety Messages

Explains signal words like DANGER and WARNING used for hazard levels.

IMMO

Establish Vehicle Communication

Steps to connect the MaxiIM tablet to the vehicle via MaxiFlash.

Vehicle Connection

Methods for connecting to a vehicle's DLC via OBD II or Non-OBD II.

VCI Connection

Details on establishing communication via Bluetooth or USB.

Vehicle Identification

Describes methods for identifying the vehicle (VIN Scan, Manual Input).

Smart Mode

Explains the guided, step-by-step IMMO functions.

Expert Mode

Explains the function-separated, technician-oriented IMMO mode.

Programming

Programming

Overview of the programming application and its functions.

Chip Read & Write

Steps for reading and writing chip data.

Key Read & Write

Procedures for reading and writing key information.

Diagnostics

Diagnosis

Overview of retrieving ECU info, DTCs, and live data.

Auto Scan

Performs comprehensive scanning of vehicle ECUs for faults.

Active Test

Performs vehicle-specific subsystem and component tests.

Special Functions

Performs component adaptations and recalibrations.

Service

Oil Reset Service

Resets the Engine Oil Life system.

Electronic Parking Brake (EPB) Service

Maintains the electronic braking system safely and effectively.

BMS

Evaluates battery charge state and registers replacement.

Steering Angle Sensor (SAS) Service

Calibrates the steering angle sensor.

DPF Service

Manages Diesel Particulate Filter functions like regeneration.

Shop Manager

VCI Manager

BT Paring

Steps to pair the MaxiFlash with the tablet via Bluetooth.

Maintenance and Service

Related product manuals