Autel MaxiDAS DS708 - Chapter 12 On-Board Mon. Test <OBDII>; Perform On-Board Monitor Test

48
Chapter 12 On- Board Mon. Test <OBDII>
The on – Board Monitor Test is useful after servicing or after erasing a vehicle’s control
module memory. The On- Board Monitor Test for non- CAN- equipped vehicles retrieves
and displays test results for emission- related powertrain components and systems that
are not continuously monitored. The On- Board Monitor Test for CAN- equipped vehicles
retrieves and displays test results for emission-related powertrain components and
systems that are and are not continuously monitored. Test and component IDs are
determined by the vehicle manufacturer.
To perform On- Board Mon. test,
1. Click the On- Board Mon. test. Button and the screen shows.
2. Select the data you wish to continue.
3. Wait a few seconds until next screen displays.
4. Pre ID Button
Next ID Button