Autel MaxiDAS DS708 - System Settings and Utilities

71
Network
1. Make sure you correctly insert the network cable into the internet connection port of
your MaxiDAS DS708.
2. Do one of the followings to set up the IP address.
z If the IP address or your local network is automatically assigned to a device,
select Obtain an IP address via DHCP.
z If your network does not automatically assign IP address, ask your network
adminis trator for an address, and then type it in the space provided.
Unit
The units of measurement can be switched between metric units of measure or English
customary for readings.
To change the units of measurement:
1. Highlight the Setup button and select the EN/METRIC.
2. Select Metric for the metric units of measure or select EN to choose the English
customary for readings.
3. Click OK to save changes or click Cancel to exit without saving changes.
Date/ Time
To set the Date/ Time for your MaxiDAS:
1. Select Setup/ Help from the main menu and click the Date/ Time button, the dialog
box shows.
2. Highlight the hour, minutes and seconds separately to change for Time setting.
3. Highlight the Date to set the date, month and year.
4. Select Date Format to change the format of the date you set.
5. Click OK to save or click cancel to exit without saving changes.
Language
Languages including English, Spanish, French, German, Chinese and Japanese are
available, to set the default languages for the scan tool software:
1. Highlight the Setup/ Help button, the Language dialog box pops up.
2. Select the language.
3. Click OK to save change or click Cancel to exit without saving changes.
Backlight
The Backlight allows you to adjust (increase or decrease) the screen backlighting.
1. Drag the slider with the stylus or click the arrows at either end of the bar to move
through, drag from left to right to bright up or drag from right to left to bright down the
screen.
2. Click OK to save changes or click Cancel to exit without saving changes.