Autel MaxiLink ML619 User Manual

i
Trademarks
Autel
®
, MaxiSys
®
, MaxiDAS
®
, MaxiScan
®
, MaxiRecorder
®
, MaxiTPMS
®
, and
MaxiCheck
®
are trademarks of Autel Intelligent Technology Corp., Ltd.,
registered in China, the United States and other countries. All other marks are
trademarks or registered trademarks of their respective holders.
Copyright Information
No part of this manual may be reproduced, stored in a retrieval system or
transmitted, in any form or by any means, electronic, mechanical, photocopying,
recording, or otherwise, without the prior written permission of Autel.
Disclaimer of Warranties and Limitation of Liabilities
All information, specifications and illustrations in this manual are based on the
latest information available at the time of printing.
Autel reserves the right to make changes at any time without notice. While
information of this manual has been carefully checked for accuracy, no
guarantee is given for the completeness and correctness of the contents,
including but not limited to the product specifications, functions, and
illustrations.
Autel will not be liable for any direct damages or for any special, incidental, or
indirect damages or for any economic consequential damages (including lost
profits).
IMPORTANT
Before operating or maintaining this unit, please read this manual carefully,
paying extra attention to the safety warnings and precautions.
For Services and Support:
http://pro.autel.com
www.autel.com
1-855-288-3587/1-855-AUTELUS (North America)
0086-755-8614 7779 (China)
support@autel.com
For details, please refer to the Service and Support section in this manual.

Autel MaxiLink ML619 Specifications

General

Brand	Autel
Model	MaxiLink ML619
Category	Scanner
Language	English

Summary

Safety Precautions and Warnings

Safety Precautions and Warnings

Essential safety guidelines for operating the scan tool and vehicle.

General Information

OBD II System Overview

Explains OBD II regulations, definitions, and operational modes.

Diagnostic Trouble Codes (DTCs)

Details the nature and structure of Diagnostic Trouble Codes.

Diagnostic Port and Readiness Status

Guides to the DLC and explains emissions readiness monitor indicators.

Using the Scan Tool

Tool Description and Controls

Details the scan tool's physical components, buttons, and display.

Device Setup and Operation

Guides users through configuring settings, power, and understanding included items.

Vehicle Compatibility

Lists the vehicle makes and models supported by the scan tool.

Product Troubleshooting

Provides solutions for common issues and errors encountered with the tool.

Playback Data

Managing Recorded Data

Instructions for managing and outputting recorded diagnostic data.

OBDII Diagnostics

Reading and Erasing Codes

Procedure for retrieving, clearing diagnostic trouble codes, and resetting readiness.

Data Monitoring and Status

Viewing real-time data, fault snapshots, and emissions readiness status.

Specific Tests and Information

Performing component tests, retrieving vehicle info, and looking up DTC definitions.

ABS/SRS System Testing

ABS/SRS Diagnostic Procedure

Steps for initiating ABS/SRS diagnostics, including vehicle selection.

Manual Vehicle Entry

Allows manual input of vehicle specifications for diagnostics.

Print and Update

Printing Diagnostic Data

Guides for connecting to a PC and printing recorded test results.

Software Update Procedure

Steps for registering the tool and updating its software via a computer.

Compliance Information

FCC and Industry Canada Compliance

States the device's adherence to radio frequency interference regulations.

Warranty and Service

Limited One Year Warranty

Details the warranty coverage, exclusions, and conditions for the scan tool.

Service and Support Contacts

Provides regional contact information for customer service and technical assistance.