Autel MaxiSys MS919 User Manual

ONLY REGISTERED AUTEL TOOLS CAN DOWNLOAD SOFTWARE UPDATES
This quickstart guide applies to the MaxiSys
®
Ultra, MaxiSys
®
MS919 and MaxiSys
®
MS909.
The VCMI/VCI icon displays when the VCMI/VCI device is used. Ensure your Wi-Fi network
is accessible and has a stable connection.
QUICKSTART GUIDE
CONNECTING TO Wi-Fi
The instructions below apply to MSUltra, MS919 and MS909
The instructions below apply to MSUltra, MS919 and MS909
- A larger menu with additional options including
Wi-Fi will display.
• Select Wi-Fi
• Tap on the lower right hand corner of the screen
- The Quick Settings menu will display.
• Tap
No Internet Connection next to the Wi-Fi signal icon
• Ensure you are connected to Wi-Fi: The Wi-Fi icon will
display in the bottom right-hand corner
• Enter your network password to sign in
• Make sure Wi-Fi is turned on
• Select your network
3
• Make sure Wi-Fi is turned on
• Select your network
• From the Android screen, select Settings
1 2
1
• Once connected, follow the instructions on the
“Updating your MaxiSYS” document
- The Wi-Fi icon will light when connection is established.
4
2
3 4

Autel MaxiSys MS919 Specifications

General

RAM	4GB
Storage	128GB
Operating System	Android 7.0
Processor	Octa-core
Display	9.7-inch 2048x1536 QXGA capacitive touchscreen
Connectivity	Wi-Fi, Bluetooth V2.1 + EDR
Ports	USB 2.0, HDMI
Sensors	Ambient Light Sensor, Gyroscope
Audio Input/Output	3.5mm headphone jack, Microphone, speaker
Protocols	ISO9141, ISO14230, ISO15765
Diagnostic Functions	Coding
Battery	15000mAh rechargeable lithium-polymer battery

Summary

CONNECTING TO Wi-Fi

Initial Wi-Fi Connection Steps

Network Selection and Connection

TOOL REGISTRATION VIA PC

Creating an Autel ID

Steps to create a new Autel ID by providing an email address and verifying it.

Product Registration Process

Details on registering the MaxiSys product using its serial number and password.

DOWNLOAD SOFTWARE UPDATES

Accessing the Update Function

Connecting the tablet to Wi-Fi and launching the software update application.

Downloading and Installing Updates

Selecting and downloading software updates for the vehicle and system.

VCMI CONNECTION VIA BLUETOOTH

Scanning for VCMI Devices

Selecting VCMI Manager and initiating a Bluetooth scan to find VCMI devices.

Pairing and Confirming Bluetooth Connection

How to pair a VCMI device via Bluetooth and confirm its connected status.

VCMI CONNECTION VIA WI-FI

Scanning for VCMI Devices via Wi-Fi

Pairing and Confirming Wi-Fi Connection

VCMI SOFTWARE UPDATES

Connecting VCMI for Software Updates

Connecting the VCMI device to the tablet and selecting the VCMI Manager application.

Updating VCMI Software Versions

Checking current and latest VCMI software versions and initiating the update process.

VID - VEHICLE IDENTIFICATION DETECTION | SCAN VIN

Accessing Vehicle Identification Scan

Performing VIN Scan

VID - VEHICLE IDENTIFICATION DETECTION AUTO VIN DETECT

Initiating Auto VIN Detection

Vehicle Identification Process

AUTO-SCAN

Selecting Vehicle Manufacturer for Scan

Acquiring VIN and System Information

TOPOLOGY MODULE MAPPING

Initiating Topology Module Scan

Steps to select Diagnostics, Auto Scan, and Fault Scan for topology mapping.

Interpreting Topology Scan Results

Understanding system status colors and navigating scan results in topology view.

INTELLIGENT DIAGNOSTICS

Accessing Intelligent Diagnostics Page

Reviewing Comprehensive Diagnostic Data

Utilizing TSBs, DTC analysis, Repair Assist, Repair Tips, and Component Measurement.

MAXISYS MEASUREMENT APPS SUITE

Oscilloscope App Functionality

Multimeter App Functionality

Waveform Generator App Functionality

OBDII CAN Bus Check Functionality