TPMS DIAGNOSE
EASY INSTRUCTIONS
• Select TPMS Diagnose from the main menu
• Follow the on-screen TPMS Diagnose Guide
Trigger all sensors and connect TS508 via OBDII cable
• In case of a duplicate sensor ID, a D will appear
• If the sensor does not trigger an X will appear
Audi A8 11/2009-12/2016
35.7
56.7
Adjust pressures displayed in
red to match Placard Sticker.
The sensor ID does not match the
ID stored in the TPMS Module.
Trouble codes present in
the TPMS Control Module.
No Trouble codes present in
the TPMS Control Module.
Battery in the sensor is low.
The sensor ID matched the ID
stored in the TPMS Module.
There is no sensor ID present in the
TPMS Module. The sensor will not
activate and requires replacement.
Sensor will not activate and must
be replaced. Original ID is stored
in the TPMS Module.
TS508
STATUS SCREEN
To Next Page
Need help?
General
