Autel X-Star - Motor Start-Up and Take-Off

Start the motors in one of the following ways:
MOTOR START-UP AND TAKE-OFF
11
Motor Starter:
Hold for 2s
Both Command Sticks:
Hold toe-in or toe-out for 2s
Left Command Stick (Mode 2):
Push upward
Take off/Landing Button:
Hold for 2s
When the motors start spinning, use one of the following methods to take off the aircraft:
Quick Guide | With XI-5S Gimbal
NOTE: Before takeoff, place the aircraft on a levelled surface and make sure the rear side of the aircraft is facing you.