Auto-Trail F Series - Electrical Drop-Down Bed; Operation of the Bed

ELECTRIC DROPDOWN BED
25 TOGETHER WE’RE GOING PLACES
Powered bed mechanism
Your motorhome may be fitted with an electrically powered bed. A touch button control panel allows the bed
to move between dierent heights. The bed is operated from a small aluminium panel with security key and two
buttons. The upper button will move the bed upwards, the lower button will move the bed downwards.
Dierent bed heights
It is important that the bed is only used in a way where the minimum clearance for the occupants can be
achieved.
Operation of the bed
• Insert the key into the lock and turn clockwise by 90°
• Press the top button to raise the bed. The bed will continue to move as long as the button is pressed, and will
automatically stop when it reaches the upper limit switch.
• Press the bottom button to lower the bed. The bed will move downwards as long as the button is pressed, or
until the bed reaches the lower limit switch.
Once the bed has reached the desired position, turn the key to the OFF position by turning it anticlockwise by
90° to the vertical position.