Swivel motor overloaded.
Lift motor overloaded.
Make sure there are no obstructions and try again
with an empty seat. Contact your installation tech-
nician if the fault persists.
Lengthwise adjustment motor overloaded
Swivel motor switch activated in wrong position.
Lift motor switch activated in wrong position.
Follow the “Emergency operation with hand held
control” instructions to reset Turny Evo's start
position. Contact your installation technician if the
fault persists.
Lengthwise adjustment motor switch activated in
wrong position.
Turny Evo has lost its position.
Follow the “Emergency operation with hand held
control” instructions to reset Turny Evo's start
position. Contact your installation technician if the
fault persists.
Recommended actionWarnings/error messages
20
Turny Evo Getting seated
To Next Page
Loading...