21
Previously Used Console
Turn off all base stations and consoles, including the used console.
Take the used console and:
Hold together to access the Set up menu.
Scroll to Reset registration.
Select Reset registration.
Follow the instructions on page 19 to register the console to the
master base station as if it is a new product.
3.2.9 REGISTERING A PREVIOUSLY USED BASE STATION OR CONSOLE
ALL SETTINGS MUST BE CLEARED
Previously Used Base Station
Turn off all existing base stations and consoles. Turn on the power to the used base
station only. Hold down the registration button for 15 seconds until all three LED’s flash.
This indicates the base station has performed a complete factory reset and all settings
have reverted to the defaults. Follow the instructions to register the base station as if it is
a new product. See page 19.
To Next Page
Loading...
Need help?
General
