DECLARATION OF CONFORMITY
The Company
CARAVAGGI Srl
REGISTERED OFFICE, FACTORY AND ADMINISTRATION :
20, Via Monte Adamello, 25037 Pontoglio (BS), ITALY
Declares under its own responsibility that the
CABLE-LAYING MACHINE DROP-IN
Model Drop-In 6 petrol
Serial number: see rating plate
Year built: see rating plate
Complies with all the provisions regarding the following European
Directives:
Machinery Directive 2006/42/CE as an amendment to Directive 95/16/CE
And since the machine has been adapted to the following harmonized
standards and specifications, where applicable:
UNI EN ISO 12100-1-2: Machine safety – Basic concepts, general design
principles, basic terminology, methodology, technical principles.
UNI EN ISO 4254-1: Farming machinery - Safety - Part 1: General requirements.
UNI EN 13683: Garden machines - Shredders / Chippers with built-in motor -
Safety.
ISO 11684: Tractors, machinery for agriculture and forestry, powered lawn and
garden equipment - Safety signs and hazard pictorials – General principles.
Person authorised to draw up the declaration of conformity: Valerio Gianpaolo
Caravaggi
The Legal Representative
( Valerio Gianpaolo Caravaggi )
Pontoglio, 01 / 01 / 2015
To Next Page
Loading...