- 10 -
TROUBLESHOOTING
1. Problem: No LED lit.
Possible Cause: AC end is not making a good connection.
Solution: Check for poor connection at AC side.
2. Problem: Green LED keeps blinking.
Possible Cause: Clamps are not making a good connection.
Solution: Check for poor connection at battery and frame.
3. Problem: Yellow LED blinks/ Red lit/Green lit
Possible Cause: The battery is sulfated.
Solution: Try to charge the battery for 24 hrs. If the LED keeps
lighting this way, replace the battery immediately.
4. Problem: Yellow LED lit right away when hooking onto battery.
Possible Cause: It is not a 12V battery.
Or, the battery is just charged.
Solution: Check if it is a 12V battery. The charger will give you
a warning if you are connecting to the incorrect
application.
Or, the battery is just charged with holding a high
voltage. Re-clamp the battery after having the voltage
drops back.
NOTE that if the troubleshooting cannot fix the issue you have, please
contact the distributor for the information.
To Previous Page
Loading...
