5
Lift function
Troubleshoot common problem
If the person is not sitting on the chair, the
chair can be raised by pressing down the lever
on the bottom right Tilt mechanism of the
cushion. A person sits in a chair, press down
the lever on the bottom right Tilt mechanism
of the cushion, and then descends.
The Tilt mechanism is reversed. Please remove the Tilt mechanism and change the
installation direction, see step 8.
Reclining function
The person sits on the chair, the person
leans back and pulls the handle on the
right side of the cushion, the chair can
lie back, when lying at a proper angle,
release the handle to lock the backrest;
continue to move the handle up, the person
recovers Sitting back, the backrest can
rebound
After the installation, I found the chair leaning forward
1
Please refer to step 3 and step 4. If you still have
problems, please contact after-sales customer
service.
The backrest cannot be installed
2
5 6
product instructions
11
07 08
09 10
Align the decorative head hoop with the head hole of
backrest and insert it gently
12
Buckle the tail fixing leather band into the button on the
backrest
Place the armrest as shown and fix it with the armrest
screws
Place the tilt mechanism on the bottom of the seat cushion as
shown in the figure and fix it with the tilt mechanism screws
Insert the base into the Tilt mechanism hole
Buckle the head pillow through the eyes as shown, and
put the lumbar pillow on the seat cushion
To Previous Page
Loading...