AutoFull AF055 - User Manual

1
Precautions for installation
(please read carefully before installation)
For the large size of this product, please try to assist 2 people during installation.
Please confirm the quantity of each component carefully before installation.
In order to protect the floor, please install it on a soft floor or a soft cloth.
To avoid injury during installation, it is recommended that you wear gloves.
Please note that once the Cylinder is installed, it is difficult to remove it. If you
need to disassemble, please tap the head of the Cylinder with a rubber-headed hammer
several times, and then remove the base. Then use the principle of vibration to
continue to gently tap the base. Therefore, you need to use tools to complete it, so
please be careful not to get injured.
(The product damage and accidents caused by this operation are not covered by the
product guarantee, please be careful)
1
2
3
4
5
Precautions for use
When cleaning, please wipe with a soft cloth.
Please read the instruction manual for the functional use of the product.
Please avoid using in damp or fire place. Please avoid direct sunlight.
Please do not step on the chair or use it as a ladder, there is a risk of
overturning.
Please note that this product is limited to one person. The use of more than
two people will destroy the stability of the product and have certain risks.
For your safety, it is strictly prohibited to disassemble the Cylinder.
1
2
3
4
5
6
Armrest×2
Head Pillow×1 Cylinder×1
Backrest×1 Seat cushion×1 Lumbar pillow×1
Tilt mechanism×1
AF055
1 2
The product, accessories and other drawings in the manual are schematic diagrams
for reference only. Due to product updates and upgrades, the actual product and
the schematic may differ slightly, please refer to the actual product. If you
have any questions, please contact customer service.
Cylinder Cover×1
Base×1 Cover of the recliner
adjuster×2
Chair wheel×5
Rabbit ear×1 Rabbit tail×1

Summary

Installation Precautions

Usage Precautions

Accessories List

Installation Steps

Insert Chair Wheel into Base

Attach the chair wheels to the base of the chair.

Insert Cylinder into Base

Connect the gas lift cylinder to the chair base.

Attach Backrest

Secure the backrest to the seat using screws.

Attach Tilt Mechanism

Mount the tilt mechanism onto the seat cushion.

Attach Armrests

Fix the armrests to the seat cushion.

Attach Head and Lumbar Pillows

Connect head pillow and place lumbar pillow on seat cushion.

Attach Tail Fixing

Secure the tail fixing leather band to the backrest.

Product Instructions

Lift Function

Instructions on how to adjust the chair's height.

Reclining Function

Guide on operating the chair's reclining mechanism.

Troubleshooting Common Problems

Chair Leaning Forward

Guidance for a chair leaning forward issue.

Backrest Cannot Be Installed

Troubleshooting steps for backrest installation problems.

Overview

1. Function Description
2. Usage Features
3. Maintenance Features

This document outlines the assembly, usage, and maintenance of a gaming chair, model AF055. The manual emphasizes safety precautions and provides detailed instructions for installation and operation.

Function Description

The AF055 gaming chair is designed to provide comfortable seating, particularly for extended periods, such as during gaming or office work. It features several adjustable components to customize the user's experience.

Key functions include:

• Adjustable Backrest: The backrest can be reclined to various angles, allowing users to find a comfortable position for relaxation or focused work. This is controlled by a handle on the right side of the seat cushion.
• Height Adjustment (Lift Function): The chair's height can be adjusted to suit different desk heights and user preferences. This function is operated via a lever on the bottom right of the tilt mechanism. When no one is sitting on the chair, pressing the lever raises it. When someone is seated, pressing the lever lowers it.
• Tilt Mechanism: This mechanism allows the chair to rock or recline, providing flexibility and comfort. It is crucial for proper installation to ensure the tilt mechanism is oriented correctly.
• Lumbar and Head Pillows: The chair comes with a lumbar pillow and a head pillow to provide additional support and comfort for the user's back and neck. The head pillow is designed to align with the head hole of the backrest, and the lumbar pillow is placed on the seat cushion.
• Swivel Function: The chair is equipped with five chair wheels on a base, allowing for easy movement and 360-degree rotation.

Usage Features

The AF055 chair is designed for single-person use and offers several features to enhance the user experience.

Installation:

• Two-Person Assembly: Due to its large size, it is recommended that two people assist with the installation to ensure safety and ease of assembly.
• Component Verification: Before starting, users should carefully confirm the quantity of each component against the provided list.
• Floor Protection: To prevent damage to the floor, the chair should be assembled on a soft floor or a soft cloth.
• Safety Gear: Wearing gloves during installation is recommended to avoid injury.
• Cylinder Installation: Once the cylinder is installed, it is difficult to remove. If disassembly is necessary, users should gently tap the cylinder head with a rubber-headed hammer several times, then remove the base. The base can then be gently tapped using the principle of vibration. Users are advised to be careful to avoid injury during this process, as product damage or accidents caused by improper disassembly are not covered by the product guarantee.
• Step-by-Step Assembly: The manual provides a clear sequence of steps:
  1. Insert chair wheels into the base.
  2. Insert the cylinder into the base (noting its initial shortest state).
  3. Unscrew backrest screws and place the backrest as shown.
  4. Fix the backrest with backrest screws, ensuring the four screws align with the holes and are tightened.
  5. Buckle up the cover of the recliner adjuster and fix it with the recliner adjuster screw (fixing the bottom buckle first).
  6. Place the chair as shown and unscrew the tilt mechanism screws and armrest screws, paying attention to their lengths.
  7. Place and fix the armrests with armrest screws.
  8. Place and fix the tilt mechanism on the bottom of the seat cushion with tilt mechanism screws.
  9. Insert the base into the tilt mechanism hole.
  10. Buckle the head pillow through the eyes and place the lumbar pillow on the seat cushion.
  11. Align the decorative head hoop with the head hole of the backrest and insert it gently.
  12. Buckle the tail fixing leather band into the button on the backrest.

Operation:

• Lift Function: To raise the chair, press down the lever on the bottom right tilt mechanism when no one is sitting on the chair. To lower the chair, press down the same lever while seated.
• Reclining Function: While seated, lean back and pull the handle on the right side of the cushion. The chair will recline. Release the handle at the desired angle to lock the backrest. To return to an upright position, continue to move the handle up, and the backrest will rebound.
• Stability: The product is designed for one person. Using it with more than two people can compromise stability and pose risks.
• Disassembly Restriction: For safety, it is strictly prohibited to disassemble the cylinder.

Troubleshooting:

• Chair Leaning Forward After Installation: If the chair leans forward after installation, it indicates that the tilt mechanism is reversed. Users should remove the tilt mechanism and change its installation direction, referring to step 8 of the assembly instructions.
• Backrest Cannot Be Installed: If the backrest cannot be installed, users should refer to steps 3 and 4 of the assembly instructions. If problems persist, contact after-sales customer service.

Maintenance Features

Proper maintenance ensures the longevity and continued performance of the AF055 gaming chair.

Cleaning:

• Soft Cloth Wipe: When cleaning the chair, users should wipe it with a soft cloth. This helps to maintain the material and prevent damage.

Environmental Considerations:

• Avoid Damp and Fire Places: The chair should not be used in damp environments or near fire sources, as this could damage the materials or pose a safety risk.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight should be avoided, as it can cause fading or degradation of the chair's materials.

Safety Precautions:

• No Stepping or Ladder Use: Users should not step on the chair or use it as a ladder, as there is a risk of overturning, which could lead to injury.
• Single-Person Use: The chair is designed for a single user. Using it with multiple people can compromise its stability and create safety hazards.
• Cylinder Integrity: The cylinder should not be disassembled for safety reasons.

By following these guidelines, users can ensure a safe, comfortable, and long-lasting experience with their AF055 gaming chair.

AutoFull AF055 Specifications

General

Chair Type	Gaming Chair
Material	PU Leather
Adjustable Height	Yes
Adjustable Backrest	Yes
Maximum Weight Capacity	150 kg
Features	Headrest, Lumbar support