EasyManua.ls Logo

AUTOHELM NMEA BRIDGE - User Manual

Default Icon
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Distributed by
Any reference to Raytheon or
RTN in this manual should be
interpreted as Raymarine.
The names Raytheon and RTN
are owned by the
Raytheon Company.
Question and Answer IconNeed help?

Do you have a question about the AUTOHELM NMEA BRIDGE and is the answer not in the manual?

Summary

Chapter 1: Introduction

Chapter 2: Mounting

Chapter 3: Operation;Wiring

3.1 NMEA Output

Data transmitted in NMEA 0183 format for non-SeaTalk equipment.

3.2 NMEA Input

Converts NMEA 0183 data to SeaTalk, re-transmitting on NMEA OUT.

3.3 Main Alarm

Drives the Autohelm Main Alarm; sounds on specific SeaTalk bus alarms.

3.4 Connecting a Personal Computer

Send or receive NMEA data to/from a PC via RS232 OUT and NMEA IN terminals.

Chapter 4: Fault Finding

Summary

Chapter 1: Introduction

Chapter 2: Mounting

Chapter 3: Operation;Wiring

3.1 NMEA Output

Data transmitted in NMEA 0183 format for non-SeaTalk equipment.

3.2 NMEA Input

Converts NMEA 0183 data to SeaTalk, re-transmitting on NMEA OUT.

3.3 Main Alarm

Drives the Autohelm Main Alarm; sounds on specific SeaTalk bus alarms.

3.4 Connecting a Personal Computer

Send or receive NMEA data to/from a PC via RS232 OUT and NMEA IN terminals.

Chapter 4: Fault Finding

AUTOHELM NMEA BRIDGE Specifications

General IconGeneral
BrandAUTOHELM
ModelNMEA BRIDGE
CategoryNetwork Router
LanguageEnglish