6
Tech Support 770-844-4200www.productivity1000.com
CPU Status Indicators
PWR
Green LED is illuminated when power is ON
RUN
Green LED is illuminated when CPU is in RUN mode
CPU
Red LED is illuminated during power ON reset, power down, or
watch-dog time-out
CPU Run/Stop Switch Specifications
RUN position
Executes user program, run-time edits possible
STOP position
Does not execute user program, normal program load position
Removable Terminal Block Specifications
Part Number
PCON-KIT
Number of Positions
3 Screw Terminals
Pitch
3.5 mm
Wire Range
28–16 AWG Solid Conductor
28–16 AWG Stranded Conductor
Screw Driver Width
1/8 in (3.175 mm) Maximum
Screw Size
M2
Screw Torque
1.7 lb·in (0.4 N·m)
Productivity1000 Power Supplies
All Productivity1000 PLC CPUs require 24VDC input power from either a P1000 power
supply or other 24VDC ±2% external power supply.
• P1-01AC: AC Input 85–132 / 170–264 VAC, 16W (power for CPU and up to
8 modules)
• P1-02AC: AC Input 85–132 / 170–264 VAC, 26W (power for CPU and up to
15 modules)
• P1-01DC: DC Input 12–24 VDC, 16W (power for CPU and up to 8 modules)
• The LG and minus terminals on the external power supply connection are internally
shorted.
• Use different 24VDC supplies for the CPU and inductive loads to keep the CPU
power clean and free of voltage spikes caused by switching inductive loads
LG
-
+
Power
Terminal
To Next Page
Loading...