Front Panel LEDs
LED State Description
PWR
On
Power input 1 or 2 is connected and operational
Off
Power input 1 and 2 are both inactive
Ethernet Port
LINK/ACT
On
Indicates that there is a proper Ethernet connection (link) between the port and another
Ethernet device, but no communications activity is detected
Blinking
Indicates that there is a proper Ethernet connection (link) between the port and another
Ethernet device, and that there is communications activity
Off
Indicates that there is not a proper Ethernet connection (link) between the port and another
Ethernet device. Make sure that each end of the cable has been plugged in securely.
1
www.AutomationDirect.com
1-800-633-0405
Stride
®
SE3 SEriES iP67 ratEd induStrial
unmanagEd EthErnEt SwitchES
3505 HUTCHINSON ROAD
CUMMING, GA 30040-5860, USA
®
General Specifications
Processing Type
Store and forward
Devices Supported
All IEEE 802.3 compliant devices are supported
MAC Addresses
1K
Memory Buffer
448Kbits
Packet Forwarding Rate
14.88 Kpps for Ethernet ports
148.8 Kpps for Fast Ethernet ports
Storage Temperature Range
-40 to +85 °C (-40 to +185 °F)
Humidity (Non-Condensing)
5 to 95% RH
Environmental Air
No corrosive gases permitted
Vibration, Shock & Freefall
IEC60068-2-6, -27, -32
EMI Emissions
FCC Part 15 Subpart B Class A, CE EN55032/EN61000-6-4 Class A
EMS
CE EN55035/EN61000-6-2 Class A: IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-
4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8 (Magnetic Field)
RoHS
RoHS (Pb free) compliant
Packaging and Protection
Plastic case, IP67
Agency Approvals
FCC, CE, UL 61010-1, 61010-2-201
Note: dowNload user maNual se3-user-m from the Product maNuals
area of automatioNdirect.com for additioNal details.
Power Details
Power Connection
Dual DC power inputs through M12 5-pin A-coded male connector
Input Voltage
Class 2 power supply: 12–48 VDC redundant power inputs
Reverse Power Protection
Yes
System Power Consumption
0.5 W
Relay Contact
No
Stride SE3 Unmanaged IP67 Models
Part Number
M12
10/100Tx Ethernet Ports
Operating
Temperature
SE3-SW5U-N67-T
5 -40 to +75°C [-40 to 167°F]
M12 Ethernet Ports
10/100BaseT Ports
M12, female, D-coding, 4-pin
Ethernet Compliance
IEEE 802.3i, 802.3u, 802.3x for 10/100 Ethernet
Auto-Crossover
Yes, allows you to use straight-through or crossover wired cables
Auto-Sensing Operation
Yes, full and half duplex
Auto-Negotiating Speed
Yes
Flow Control
IEEE 802.3x flow control, back pressure flow control
Cable Requirements
Twisted pair (Cat5e or better, shielded recommended)
Max. Cable Distance
100m [328ft]
Note: M12 caps need to be used on open (disconnected) ports.
Replacement caps (Part # ZP-JBH-CAP) are available from AutomationDirect.com
RoHS Compliant
RoHS
To Next Page
Need help?
General
