AutomationDirect DL205 Instruction

LED Connector Module ZL-CM08L120
Cables and PLC I/O Modules
PLC I/O Module TypeCable TypePLC Type Connector Module Type
ZL-CM08L120
D2-08NA-1ZL-2CBL1DL205 ZL-CM08L120
WARNING : WIRE ONLY ACCORDING TO WIRING DIAGRAMS SHOWN BELOW TO
AVOID CAUSING DAMAGE TO THE PLC OR CONNECTOR MODULE. MATCH THE
CORRECT COMBINATION OF CABLE, PLC I/O MODULE, AND CONNECTOR MODULE AS SHOWN.
EXAMPLE CONNECT
A B
A1
-
C 01 2 3456
TYPE CONNECTION FOR SENSOR DC
CONFIGURATION NPN
A1A1 A1A1 A1
A1A1
A2A2A2
A2A2A2 A2A2
SENSOR DC
TYPE
AT1-AN-1A
SENSOR DC
TYPE
AT1-AP-1A
A1
-
TYPE CONNECTION FOR SENSOR DC
CONFIGURATION PNP
A1A1 A1A1 A1 A1A1
A2A2A2 A2A2A2 A2A2
C01 2345 6
BU
BN
BK
BU
BN
BK
TYPE TYPE
REV 1.1PAG. 1

AutomationDirect DL205 Specifications

General

Programming Software	DirectSOFT
Programming Language	Ladder Logic
Memory	Up to 32K words
Mounting	DIN Rail or Panel Mount
Humidity	5% to 95% non-condensing
Type	Programmable Logic Controller (PLC)
CPU Type	16-bit
Input Voltage	24V DC
Number of I/O	Up to 256 I/O
Communication Ports	RS-232, RS-485
Expansion Modules	Digital, Analog, Specialty
Operating Temperature	0°C to 60°C
Storage Temperature	-20°C to 70°C
Weight	Varies depending on module configuration
CPU Modules Supported	D2-230, D2-240, D2-250