AutoMaxi SILVER line FIX POINT 124 - Detailed Mounting Steps

ENGLISH
8
Fixation
accessories in the
rail: Unclip an end.
Remove the cen-
tral part of snap
ring .
Fasten the acces-
sory in the rail,
reclip the ends.
8
9
Read and
follow instruc
-
tions for
mounting and
use.
Keep tools,
keys, packag-
ing, mounting
instructions for
future uses.
9
6
Check the cor
rect position and
the appropriate
fastening of the
bars (in the event
of problem, redo
the mounting of
the bars).
6
5
Cut the obtu-
rator O and clip it
on in the apertures
located under the
bars.
5
Balance
t
he jutting out
of the bars
from the
right/left side of
t
he vehicle.
Strongly tight-
e
n the screws
V1 (8 N.m)
using the tool.
Check the
orientation of
the aerody-
n
amic deflector
of the snap
rings J.
Put the tabs P
in place
against the
roof.
Strongly tight-
en the screws
V2 (5 N.m)
with the help of
the tool.
3
3
4
4
J
J
5 N.m
V
2
8
N.m
Put the theft
protection covers
and lock with the
keys.
7
7