AutoMaxi SILVER line FIX POINT 124 - Vehicle-Specific Fitment and Final Assembly; Vehicle Compatibility and Technical Specifications; Compatible Vehicle Models; Technical Specifications

Montage sur véhicule - Assembly conveys - Fahrzeugmontage - Montaggio veicoli
Montaje vehiculo - Montagem veiculo - Montage op voertuig - Montaz relingów
Strongly tight
-
en the screws
V2 (3,5 N.m)
with the help of
the tool.
3,5 Nm
Adjust the
bars on the
vehicle follow-
ing the dia-
gram opposite.
Check the ori-
entation of the
aerodynamic
deflector of the
snap rings J.
Put the tabs P
in place
against the
roof.
J
J
Unclip the
obturators
l
ocated on the
roof of the
vehicle at the
level of the
anchoring
p
oints.
Remove the
obturators.
124
FIX POINT
1
ENGLISH
1
2
2
3
Max.
75
Kg
3
P
V2
Focus C-Max = ø6x50 mm
307 / Mondeo II = ø6x40 mm
FORD
M
ondeo II 4/5 01
➔ 7
5B
Focus C.MAX 5 03
➔ 75 C
Focus II 3,5 10/04
➔ 75 C
Focus II 4 10/04
➔ 75 C
PEUGEOT
3
07 3,5 01
➔ 7
5B
P017
P018
P016
P015
CONVIENT POUR VEHICULE - SUITABLE FOR A VEHICLE - ENTSPRICHT FÜR FAHRZEUG - ADATTO PER VEICOLO
CONVIENE PARA UN VEHÍCULO - CONVÉM PARA VEÍCULOS - GESCHIKT VOOR VOERTUIG - ODPOWIEDNIE DO POJAZDU
KG KG
FORD
PEUGEOT
8
Read and
follow instruc-
tions for
mounting and
use.
Keep tools,
keys, packag-
ing, mounting
instructions for
future uses.
8
F
ixation
accessories in the
rail: Unclip an end.
R
emove the cen-
tral part of snap
ring .
Fasten the acces-
sory in the rail,
reclip the ends.
7
7
Put the theft
p
rotection covers
and lock with the
k
eys.
6
6
5
C
ut the obtu-
rator O and clip it
on in the apertures
located under the
b
ars.
Check the correct
p
osition and the
appropriate fasten-
ing of the bars (in
the event of prob-
l
em, redo the
m
ounting of the
bars).
5
B
alance the
jutting out of
the bars from the
right/left side of
the vehicle.
Strongly tighten
the screws V1
(8 N.m) using
the tool.
4
4
8 N.m