Fixed dose rate alarm thresholds
Fixed dose alarm thresholds
Programmable alarm thresholds
with 6150AD3/4/5/6 (/H, /E): one additional
programmable threshold for both dose rate and dose
Preferential direction and location of
see sketch in section 3.2
Representation of dose rate
simultaneously in analog and digital form in the LCD,
including indication of the unit
Indication of dose rate mean value,
maximum value, dose, and thresholds
digitally in the LCD if requested with function key,
including indication of the unit
audibly through intermittent sound (may be reset),
visually through flashing loudspeaker symbol (with /E models,
the analog scale divisions additionally flash)
with 6150AD3/4/5/6 (/H, /E): audibly through intermittent
sound (may be reset), visually through flashing loudspeaker
symbol and flashing bar graph
Audible single pulse detection
yes, may be turned off with signal key
EL lamp, is turned on with illumination key,
continues for ten seconds after releasing the key
automatically after switching on while on/off key is pressed
deviation max. ±10% referred to indication at +20°C
nominal range 0 to 95% within specified temperature range
nominal range 60 to 130 kPa (600 to 1300 mbar)
Geotropism (change of response as a
result of gravitational effects)
9V battery (alkaline according to IEC 6LR61 recommended)
or 9V accumulator (rechargeable battery)