2
Built-in Air Pump
Overheat Protection
Pressure Gauge
Fault Indicator
Flow Meter
Flow Adjustment Knob
Oil Drain Valve
Liquid Level Gauge
None
Yes
None
None
Yes
Yes
None
None
AUTOOL SDT103 smoke leak detector is specially designed to
detect leaks in automotive EVAP pipes, compared with AUTOOL
SDT101, a visual flow meter, and airbag adapter are added, which
makes it more convenient and quick to detect leakage, help main-
tenance technicians quickly solve leakage problems and save
working time and enhance work efficiency.
AUTOOL SDT103 is suitable for all pipelines of cars, motorcycles,
snowmobiles, off-road vehicles, dune buggies, light trucks and
speedboats. It’s recommended to use an quickly.
PRODUCT INTRODUCTION
Overview
Features
Low oxygen combustion
The AUTOOL smoke leak detector employs a forced combus-
tion smoke generation method in a low oxygen environment. It
is energized by a conductive column to the heating wire, which
rapidly heats up to more than 300°C so that the mineral oil
reaches the ignition point and enters the state of combustion.
Due to the small intake of air flow, it is insufficient to provide
sufficient oxygen to maintain full combustion, thus the combus-
tion mainly occurs on the surface of the heating wire. Subject
to high-temperature heating, the mineral oil retention object
can continue to burn insufficiently around the heating wire,
thus producing a large amount of smoke.
Working
theory
●
To Next Page
Loading...
Need help?
General