Need help?Do you have a question about the Autophix 7910 and is the answer not in the manual?
General| Connectivity | USB |
|---|---|
| Screen Size | 2.8 inches |
| Display | 2.8" LCD color screen |
| Power Source | Vehicle battery via OBD2 port |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Storage Temperature | -20°C to 70°C (-4°F to 158°F) |
| Supported Protocols | J1850 PWM, J1850 VPW |
| Languages | English, French, Spanish, German, Italian, Russian, Portuguese |
| Battery | No internal battery, powered by OBDII |
Details the vehicle brands and systems supported by the 7910 tool.
Lists the technical specifications of the 7910 device, including screen, voltage, and temperature.
Describes the LCD display of the scan tool, its resolution, and backlight feature.
Confirms a selection or action from a menu.
Cancels a selection or returns to the previous menu.
Allows navigation through menus and data screens.
Connects the scan tool to the vehicle's Data Link Connector (DLC).
Performs quick State Emissions readiness check and drive cycle verification.
Quickly reads the vehicle's fault codes.
Steps to connect the 7910 scan tool to the vehicle.
Details how to select BMW, MINI, or Rolls-Royce series for diagnosis.
Guides users through selecting vehicle series and chassis for diagnosis.
Scans all vehicle systems for diagnosis.
Allows selection of specific systems for diagnosis.
Displays diagnostic information and version index.
Explains how to read and check vehicle fault codes.
Guides on how to erase fault codes after confirmation.
Allows viewing real-time data from vehicle sensors.
Details CBS functions like Oil reset, CBS Reset, and CBS Correction.
Performs engine oil and vehicle check resets.
Details diagnosis for the ECM, including adaptation values and idle speed.
Guides on registering battery replacement for the vehicle.
Covers functions for the Electronic Parking Brake system.
Explains the initialization process for the steering-angle sensor.
Explains stored and pending codes, and how to read them.
Details the process of erasing emission-related diagnostic information.
Explains Inspection and Maintenance readiness and monitor status.
Describes viewing real-time live data from vehicle sensors.
Explains the evaporative system leak test function.
Displays VIN, CID, and CVN information for the vehicle.
Allows selection of the user interface language.
Controls the audible beep function of the device.
Manages whether startup instructions are displayed.
Selects between metric and imperial units.
Allows customization of the device's visual theme.
Describes using the feedback function for reporting issues or errors.
To Next Page
