Need help?Do you have a question about the Autophix V007 and is the answer not in the manual?
General| Brand | Autophix |
|---|---|
| Model | V007 |
| Category | Diagnostic Equipment |
| Language | English |
Important safety measures to prevent injury, device damage, and fire hazards during operation.
Details supported vehicle brands, models, and communication protocols for the V007 scanner.
Lists display, operating/storage temperatures, power requirements, and physical dimensions of the V007.
Enumerates all items included in the V007 package, such as the main unit and cables.
Identifies and explains the function of each part of the V007 scan tool, including display and buttons.
Steps for turning on the ignition and locating the vehicle's Data Link Connector (DLC) for connection.
Outlines the primary options available in the V007's main menu for initiating diagnostics.
Explains how to access and initiate the V/A Diagnosis function on the V007.
Details the process to retrieve Electronic Control Unit (ECU) information using the V007.
Guides users on how to read and check diagnostic trouble codes (DTCs) stored in vehicle modules.
Instructions on how to erase diagnostic trouble codes (DTCs) from the vehicle's computer modules.
Explains the procedure for executing service reset functions like oil or inspection service.
Outlines the steps and preconditions required for performing throttle body adaptation.
Describes the process for replacing Electronic Park Brake (EPB) brake pads using the V007 tool.
Explains how to read diagnostic trouble codes (DTCs) and pending codes via the OBDII interface.
Instructions for clearing diagnostic trouble codes (DTCs) and pending codes using the OBDII function.
Details how to retrieve the vehicle's VIN using the OBDII diagnostic function.
Shows how to view the communication protocol used between the V007 and the vehicle.
Guide on how to adjust the display contrast for better readability.
Instructions for selecting the preferred unit of measurement for displayed data.
Steps to select the desired language for the V007 interface.
Information on how to use the feedback feature, including starting recording for issue reporting.
Explains how to record and send feedback data to Autophix for issue analysis.
How to check the current software, hardware, and library versions of the V007 tool.
Instructions on where to download software update files for the V007 tool from the official website.
Steps to initiate the software update process using the downloaded files and the device.
How to submit feedback data, like 'Feedback.bin', to support for troubleshooting.
Guide on installing necessary drivers for the V007 tool on a computer for software updates.
Details the terms and conditions of the one-year limited warranty for Autophix products.
Provides guidance on contacting support and returning the scan tool for repair or inquiries.
To Next Page
