To Next PageTo Next PageWhy is the intensity not felt on my Auvon AS8012 at a low level?
If you barely feel the intensity on your Auvon Massager, ensure the pads are firmly attached to your skin and that you've peeled off the transparent films. Avoid stacking or overlapping the pads. Check that the cord is correctly connected to the unit. If the intensity setting feels weak, increase the intensity level. A low battery can also cause this, so charge the device.
What to do if my Auvon AS8012 power cuts off during use?
If your Auvon Massager is cutting off during use, it could be due to a weak battery. Try charging the battery. Alternatively, the cord might be broken and need replacement. In case pads get deteriorative, contact the vendor for replacements.
Why does one pad feel stronger than the other on my Auvon AS8012?
It's normal for one pad to feel stronger than the other on your Auvon Massager, as different body areas react differently. Ensure the pads are moist and making good contact. If the adhesive surface is dirty or dry, gently wash it with your fingertips under slow running water for about 3 seconds. Also, reduce the application time or intensity if it's set too high.
What to do if I don't feel the intensity on my Auvon Fitness Equipment?
If you're not feeling the intensity even at a low setting on your Auvon Fitness Equipment, here are a few things to check: * Make sure the pads are firmly attached to your skin. * Remove any transparent films from the adhesive surface of the pads. * Ensure the pads aren't stacked or overlapping. * Verify the cord is correctly connected to the unit. * Try increasing the intensity level. * Charge the battery, as a low battery can weaken the intensity.
General