(1) Timing ON/OFF button: set the timing mode. After each pressing, the
mode will be changed. It shows in the following display.
ON OFF CLEAR
(2) Sleeping button: which enables you to start the automatic operation
in sleeping mode and stops by pressing on it again.
(3) Selection button for operation mode: which enables you to select
different operation modes, after each pressing, the operation mode will
be changed. It shows in the following display.
AUTOMATIC COOL DRY FAN HEAT
Remarks: Only cool type remote control has no heat mode
(4) Wind direction adjusting button: press the button, the horizontal
airflow direction plate can adjust automatically. When you have the
desired wind direction, please press it again, the airflow direction plate
will maintain the same position.
(5) Fan speed selection button: you can select fan speed from “Power”,
“High”, “Low”, and “Mute”.
P H L MUTE
(6) ON/OFF button: you can start the air-conditioner by pressing this
button and stop its operation by pressing it again.
(7) Setting button▲: Press the button, the setting temperature or timer
To Next Page
Loading...
Need help?
General
