What to do if there is no picture or video flash on AV Access Extender?
- MMaureen DavisJul 28, 2025
If you're experiencing no picture or video flashing with your AV Access Extender, here are a few things to check: * Make sure all your devices are powered on. * Verify that all cables are of good quality and properly connected, and that their lengths are within the specified maximum distance. * Check that all LED indicators are functioning normally. * Confirm that the source and display work correctly when connected directly. * Ensure the input resolution is supported by the device and is within 4K@30Hz when a Dolby Vision signal is being used.