Avallon APAC140C - User Manual

Questions and Answers

L
leonardscottJul 31, 2025
What to do if my Avallon APAC140C is not working?
- T
  tyler33Jul 31, 2025
  If your Avallon Air Conditioner isn't working, first, ensure it's properly plugged into a working outlet. Check the LCDI power cord and press the Reset button. If that doesn't work, the unit might not be getting enough power, so try a different outlet and check your circuit breaker, referring to the rating label on the back of the unit for amperage. Also, make sure the water reservoir isn't full, and drain it if necessary. If no indicator lights turn on, it could be a disconnected control panel.
C
casey80Aug 4, 2025
How to fix an Avallon Air Conditioner remote that is not working?
- R
  richardriosAug 4, 2025
  If your Avallon Air Conditioner remote isn't working, start by installing new batteries. If new batteries don't solve the issue, ensure the batteries are installed correctly. If the problem persists, the remote control might be defective.
X
xalvarezAug 10, 2025
Why is my Avallon Air Conditioner making a loud noise?
- J
  Jonathan SmithAug 10, 2025
  If your Avallon Air Conditioner is making a loud noise, ensure it's placed on a level surface. Check for any foreign objects that might be jamming the fan and remove them. If the floor below the unit is uneven, move the unit to a level surface.
Z
zdillonAug 14, 2025
Why does my Avallon APAC140C Air Conditioner trip the power cord?
- T
  tpachecoAug 15, 2025
  If your Avallon Air Conditioner runs briefly and then trips the power cord or circuit breaker, the outlet might not be supplying enough current.
D
Danielle AndersonAug 20, 2025
Why is my Avallon Air Conditioner making a metallic knocking sound?
- J
  jacksonmichaelAug 20, 2025
  If your Avallon Air Conditioner is making a continuous metallic knocking or pinging sound, shut it off and let it sit on a level surface for at least 24 hours before restarting. This is because the unit may have been shipped on its side.
M
Meagan NguyenAug 25, 2025
What to do if the front control panel lights blink red on my Avallon Air Conditioner?
- A
  Aaron GallegosAug 25, 2025
  If the front control panel lights on your Avallon Air Conditioner are blinking red, it means the water reservoir is full. You should drain the unit.

Summary

Important Safety Information

Electrical Safety

Safety precautions for electrical connections and usage.

General Safety Precautions

General guidelines for safe operation and handling of the unit.

LCDI Safety Plug Testing

Instructions for testing the Leakage-Current Detection and Interruption safety plug.

Window Kit Installation Instructions

Preparations and Parts List

Details on preparing for window kit installation and a list of included parts.

Installing the Grated Adapter

Step-by-step guide for installing the grated adapters.

Installing the Window Plates

Instructions for installing the window kit plates into the window.

Attaching Duct Connectors

Guide on connecting duct connectors to the exhaust hose.

Connecting Hose to Unit and Adapter

Exhaust Hose and Drainage

Drainage Options

Remote Control Overview

Remote Control LCD Indicators

Operating the Remote Control

Power, Cooling, and Dehumidifying Modes

Heat Mode Operation

Fan Only and Automatic Modes

Fan Speed and Clock Settings

Timer Functionality

Front Panel Lights and Controls

Maintenance

Cleaning the Unit Exterior

Cleaning the Air Pre-filter

Troubleshooting

General Troubleshooting Guide

A guide to common problems and their corresponding solutions.

Troubleshooting Cooling Problems

Troubleshooting specific problems related to the unit not cooling effectively.

Avallon APAC140C Specifications

General

Dehumidification	Yes
Fan Speeds	3
Refrigerant	R410A
Remote Control	Yes
Cooling Capacity	14000 BTU/h
Coverage Area	Up to 700 sq. ft.
Power Supply	60/60 Hz
Features	Sleep Mode, Timer

Related product manuals

Avallon APAC140HC

27 pages