Why is my Avallon APAC140HC Air Conditioner not cooling?
If your Avallon air conditioner isn't cooling at all, make sure it's in cooling mode and the set temperature is lower. The compressor might take up to 3 minutes to turn on, or longer if it's too warm. Ensure the room temperature is below 90°F. Also, check and clean the filter and remove any blockages from the exhaust port.
What to do if my Avallon APAC140HC blows cold air but doesn't lower room temperature?
If your Avallon air conditioner blows cold air but doesn't lower the room temperature, ensure the unit is vented and minimize the area to be cooled. Close any open doors and windows, and remove or shut off additional heat sources. Make sure that the room is properly insulated and the room temperature is below 90°F. Minimize direct sunlight entering the room by closing curtains or blinds. Clean the filter, vacuum the condenser coils, and remove any obstructions from the air intake or exhaust ports.
General| Brand | Avallon |
|---|---|
| Model | APAC140HC |
| Category | Air Conditioner |
| Language | English |
Safety guidelines related to the unit's electrical components and usage environment.
General precautions for safe operation and handling of the portable air conditioner.
Identifies and labels the components visible on the front of the unit.
Identifies and labels the components visible on the back of the unit.
Details on preparing for the installation of the window exhaust kit.
Guidance on choosing the optimal placement for the window kit installation.
Step-by-step instructions for attaching the grated adapter to the window kit plate.
Instructions for placing and securing the window kit plates in the window.
Guide on how to connect the duct connectors to the exhaust hose.
Instructions for attaching the duct connector to the main unit.
Steps for connecting the duct connector to the window kit's grated adapter.
Method for draining water directly from the unit via a hose.
Using the internal pump and water line for continuous water removal.
Utilizing a mist nozzle to expel excess moisture through the exhaust hose.
Explanation of the remote control buttons and the LCD display indicators.
Instructions for inserting batteries into the remote control.
Details on the various indicators shown on the remote control's LCD screen.
How to operate the unit in cooling mode using the remote control.
How to operate the unit in dehumidifying mode using the remote control.
Instructions for operating the unit in heat mode.
How to operate the unit using only the fan function.
How the unit automatically adjusts cooling, dehumidifying, or heating.
How to adjust the fan speed for different operating modes.
Instructions for setting the clock on the remote control.
How to set the timer for automatic unit turn-on or turn-off.
Description of the different colored lights on the unit's front panel and their meanings.
Information about the physical buttons and switches on the unit's front panel.
Guidelines for cleaning the exterior and internal components of the air conditioner.
Steps for cleaning and maintaining the unit's pre-filter.
Instructions for preparing the unit for long-term storage.
Tips and recommendations for efficient and energy-saving operation.
Definition and explanation of the Seasonally Adjusted Cooling Capacity (SACC) rating.
To Next Page
