Important Safeguards
●
The instruction manual contains important operating and maintenance instructions. For your
safety, it is necessary to refer to the manual. Keep the manual for future reference.
●
Do not hit or drop the unit.
●
Do not expose the unit to vibration, direct sunlight, too high or low temperature,or humidity.
●
Do not disassemble the unit by yourself. Refer servicing to qualified service personnel.
Power Supply
AC adapter power
●
Plug the supplied AC power adapter into the power input on the right side of the unit. Connect
the power cord to a wall outlet. Make sure the voltage is compatible.
●
Always remember to disconnect the power cord from the wall outlet before disconnecting it from
the unit.
●
Disconnect the power cord from the outlet when not in use.
●
Adapter input power: 100-240V~50/60Hz,400 mA
●
Adapter output power: DC 5V/500 mA
Additional power
●
Insert 1 piece battery RC2025 into the additional battery terminal. This is additional power supply
intended for maintenance of the clock. Without the additional power, you will need to set the clock
anew after each interruption of power supply.
● A new b
attery should be acquired by user.
●
When the battery is exhausted it should be replaced.
To Next Page
Loading...