13
3. Dispense about 2 liters of
water from the unit into a bucket
by pressing the hot water press
paddle (#9) and the cold water
press paddle (#6) into a bucket.
4. Place a large bucket beneath the drain
outlet (#14) located on the back of the unit.
Remove the drain cover and allow the water
to drain from the unit. Water will start flowing
as soon as the drain cover is removed.
Rinsing, Cleaning, and Draining
Caution: The dispenser will heat water to a temperature of approximately 185°F.
It can cause severe burns if not handled carefully. Please use caution while operating
and cleaning. Please allow ample time for any hot water inside the machine to cool
down before draining it.
Cleaning
English
To Next Page
Loading...
