16 (34)
6. Installing hydraulic blade adjustment
The Log splitter 650 can be equipped with
hydraulic blade adjustment, and is equipped
with necessary fastening points and holes for
installation of hydraulic hoses.
With the hydraulic blade adjustment, the Log
splitter 650 can be used for spl
size of logs without leaving the driver's seat.
The hydraulic blade adjustment kit A443834
includes all necessary components needed in
installation.
Hydraulic blade adjustment kit A443834 (optional
equipment)
6.1 Qualification requirements for installation work:
Knowledge and skills about hydraulic assemblies are required for making the installation. It is recommended
to leave the installation of hydraulic components to qualified service technicians. The manufacturer or it’s
representative are not responsible for damages, losses or injuries resulted from incorrect or incomplete
installations. Contact your nearest Avant dealer or service point, if you have any additional questions or
require installation services.
DANGER
Risk of high pressure fluid injection through skin.
Installation includes assembling
hydraulic components. Incorrect assembly or loose fittings may cause ejection of high
pressure fluid. Follow carefully all safety procedures regarding hydraulic assemblies and
all given instructions.
The instructions given in this chapter are intended for qualified service technicians or
individuals with training and experience about hydraulic assemblies.
WARNING
Risk of serious personal injury. The safety procedures concernin
g hydraulic
assemblies apply both when installing new components or when modifying existing
hydraulic systems. The following installation instructions include the necessary
information needed in installation, but installation or modification work are allow
the person doing them can perform them safely.
The following safety procedures and general safety principles regarding hydraulic
systems must be followed. Contact your Avant dealer or service point for more
information or installation services.
Protect the environment from leaking of hydraulic oil and prevent oil from draining on the
ground. Keep any loosened hydraulic hose in an upright position or plugged, so that they
will leak as little as possible.
To Next Page
Loading...