What to do if the compressor is not running on my Avantco Equipment 178GDC49HCB?
If the compressor on your Avantco Equipment Commercial Food Equipment isn't running, start by checking the fuse or circuit breaker and replace or reset if needed. Ensure the power cord is properly plugged in. Also, verify that the thermostat isn't set too high and, if the unit is in defrost cycle, allow it to complete.
Why is the cabinet temperature too warm in my Avantco Equipment 178GDC49HCB Commercial Food Equipment?
If the cabinet temperature of your Avantco Equipment Commercial Food Equipment is too warm, first ensure the thermostat isn't set too high. Next, check for any airflow blockages and rearrange items to allow proper air circulation, making sure there is at least four inches of clearance from the fan. If these steps don't resolve the issue, you should contact a service technician to check refrigerant levels. Also, make sure the door is completely closed.
General| Brand | Avantco Equipment |
|---|---|
| Model | 178GDC49HCB |
| Category | Commercial Food Equipment |
| Language | English |
To Next Page
