62 Apr-09
Avantes www.avantes.com info@avantes.com
File Menu: Save Experiment
With this option, graphic files are saved. All graphic files will be saved in the experiment directory
that has been picked by the option File-Load-Experiment or File-Start New-Experiment.
Saving graphic files if one spectrometer channel is enabled
First, a window appears in which a line of comments can be entered to the saved graph. Next two
files will be saved: the first file contains the saved spectrum data. The name of this first file starts
with the experiment name, directly followed by the sequence number of the saved spectrum. The
extension of this first file depends on the current measuring mode, as shown below:
Extension Mode
ROH Scope Mode
ABS Absorbance
TRM Transmittance/Reflectance
IRR Irradiance
The second file contains the line of comments, which may have been added to this graph. The name
of this second file is, except for the extension, the same as the name of the first file (experiment
name and sequence number). The extension of this second file also depends on the measuring
mode, as shown below:
Extension Mode
RCM Scope Mode
ACM Absorbance
TCM Transmittance/Reflectance
ICM Irradiance
Example: suppose the name of our experiment is "avantes". Then, saving one spectrum in scope
mode, one in absorbance mode and two in transmittance mode results in the following files:
avantes0001.roh: spectrum data in scope mode
avantes0001.rcm: comments for the spectrum saved in avantes0001.roh
avantes0001.abs: spectrum data in absorbance mode
avantes0001.acm: comments for the spectrum saved in avantes0001.abs
avantes0001.trm: spectrum transmittance mode
avantes0001.tcm: comments for the spectrum saved in avantes0001.trm
avantes0002.trm: spectrum data in transmittance mode
avantes0002.tcm: comments for the spectrum saved in avantes0002.trm
To Next Page
Loading...
