Apr-09 63
Avantes www.avantes.com info@avantes.com
After leaving the application and opening AvaSoft the next time, saving graphics in scope,
absorbance and transmittance mode, will then result in respectively the data-files avantes0002.roh,
avantes0002.abs and avantes0003.trm, as well as the comment files avantes0002.rcm,
avantes0002.acm and avantes0003.tcm.
Before saving, the name of the graphic file is displayed in the status bar at the bottom of the
screen. After saving, the sequence number is automatically incremented by one.
Saving graphic files if multiple spectrometer channels have been enabled
If graphic files are saved while more than one channel is enabled at the same time (see option View-
Channel), then the graphic filename for each channel that is displayed gets a different sequence
number. For example, the result of saving one experiment in triple view mode is three graphic data
files and three comment files, for instance:
avantes0002.roh: spectrum data in scope mode (e.g. spectrometer 1 or Master)
avantes0003.roh: spectrum data in scope mode (e.g. spectrometer 2 or Slave1)
avantes0004.roh: spectrum data in scope mode (e.g. spectrometer 3 or Slave 2)
avantes0002.rcm: comments for the spectrum saved in avantes0002.roh
avantes0003.rcm: comments for the spectrum saved in avantes0003.roh
avantes0004.rcm: comments for the spectrum saved in avantes0004.roh
For each channel a different comment line can be entered.
To make it easier to select the graphic files later on with the option File-Display Saved Graph, all
comment lines start with a short name for the channel at which the graph has been saved: M for
Master, S1 for Slave1 and so on.
After saving, the sequence numbers in this example (triple view mode) will automatically have been
increased to 0005, 0006 and 0007, for resp. Master, Slave1 and Slave2.
File Menu: Print
After selecting the print menu option, the background colors in the graphical region will become
been marked, the line style for the
spectra will also change from colored
to black. A dialog will be shown in
which the title for the printout can
be entered. In the next window, the
printer settings can be changed (e.g.
portrait or landscape printing,
printing quality etc.). After clicking
OK in the printer settings dialog, the
graph will be printed, and the
original graph colors will be restored
on the monitor.
To Next Page
Loading...
