EasyManua.ls Logo

Avanti BD6000 - User Manual

Avanti BD6000
36 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
INSTRUCTION MANUAL
MANUAL DE INSTRUCCIONES
Model Number / No. de Modelo: BD6000
BEER DISPENSER
(DISPENSADOR / ENFRIADOR DE CERVEZA)
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING
INSTRUCTIONS.
La sección en espa ñol empieza en la página 27.
Avanti has a policy of continuous improvement on its products and reserves the right to change
materials and specifications without notice.
Avanti Products, A Division of The Mackle Co., Inc.
P.O. Box 520604 - Miami, Florida 33152
www.avantiproducts.com

Table of Contents

Questions and Answers

  • B
    Brett SmithJul 30, 2025
    Why does my Avanti Beverage Dispenser turn on and off frequently?
    • S
      Sarah PerezJul 30, 2025
      Your Avanti Beverage Dispenser might be turning on and off frequently due to several reasons: the room temperature may be hotter than normal, the door may be opened too often or not closed completely, the temperature control may not be set correctly, the door gasket may not seal properly, or the Beverage Dispenser may not have the correct clearances. To resolve this, try the following: * Adjust the Beverage Dispenser's location or provide additional cooling to the room. * Minimize how often you open the door. * Ensure the door is closed completely. * Adjust the temperature control setting. * Inspect and clean the door gasket. * Ensure there is proper clearance around the Beverage Dispenser.
  • M
    Meghan DeckerAug 7, 2025
    What to do if my Avanti Beverage Dispenser does not operate?
    • K
      Kenneth MarshallAug 7, 2025
      If your Avanti Beverage Dispenser isn't operating, the possible causes are that it is not plugged in, the circuit breaker tripped, a fuse is blown, or the temperature control knob is in the “OFF” position. To fix this, check if the Beverage Dispenser is plugged in, check the circuit breaker or replace the blown fuse, and ensure the temperature control knob is set to the desired position.
  • D
    David Watson DDSAug 14, 2025
    Why is my Avanti BD6000 Beverage Dispenser making so much noise?
    • C
      chasewilliamAug 14, 2025
      An Avanti Beverage Dispenser may make noise if it is not leveled. Ensure that the Beverage Dispenser is leveled. The rattling, gurgling, popping, and cracking noises may come from the flow of the refrigerant, which is normal.
  • W
    Walter WilliamsAug 21, 2025
    How to fix the door of Avanti BD6000 Beverage Dispenser that will not close properly?
    • R
      rcookAug 21, 2025
      If the door of your Avanti Beverage Dispenser won't close properly, it could be due to several reasons: the Beverage Dispenser might not be leveled, the door may have been reversed and not properly installed, the gasket could be dirty, or the shelves, metal plate, or beer keg might be out of position. You can solve this by leveling the Beverage Dispenser, reinstalling the door properly if it was reversed, cleaning the door gasket, or reorganizing the shelves, metal plate, or beer keg.

Summary

Instruction Manual

Beer Dispenser Safety

Important Safeguides

Registration Information

Protect Your Product

Keep model number and date of purchase for insurance claims.

Promote Better Products

Provide input for product development and future needs.

Help Us Help You

Service Information

Steps to follow for assistance and complaint resolution.

Parts and Features

Important Safety Instructions

Installation Instructions

Before Using Your Beer Dispenser

Steps to prepare the unit before initial operation.

Installation of Your Beer Dispenser

Placement and environmental considerations for installation.

Electrical Connection

Proper grounding and connection to power outlet.

Extension Cord

Recommendations and requirements for using an extension cord.

Reversing the Door Swing

Instructions for changing the door opening direction.

CO2 Cylinder Holder Installation

Steps to install the metal holder for the CO2 cylinder.

CO2 Cylinder Installation

Steps to install the charged cylinder into the holder.

CO2 Regulator Installation

Steps to attach the regulator to the cylinder valve.

Keg Coupler Installation

Steps to insert and lock the keg coupler.

CO2 Air Line Hose Installation

Attaching the red hose to the keg coupler.

Protective Metal Plate Installation

Installing a plate to protect the cabinet floor from the keg.

Beer Keg Installation

Steps to position and place the beer keg inside the cabinet.

CO2 Air Line Hose Through Cabinet Wall

Inserting the air line through the wall opening.

CO2 Air Line Hose to Regulator

Connecting the red hose to the regulator.

Beer Tower Installation

Steps to install the beer tower assembly.

Connecting Beer Tower to Coupler

Connecting the beer tower's wing nut to the coupler.

How to Tap a Keg of Beer

Procedure for tapping the beer keg.

Opening CO2 Cylinder Main Valve

Steps to open the main CO2 cylinder valve.

Adjusting the CO2 Regulator

How to adjust the regulator for correct internal keg pressure.

Spanner Faucet Wrench

Using the wrench for faucet removal or tightening.

Plastic Faucet Lever

Attaching and adjusting the faucet lever for proper sealing.

Dispensing Beer

Guidelines for pouring beer correctly.

Converting to All Refrigerator

Operating Your Beer Dispenser

Setting The Temperature

How to adjust the temperature for optimal cooling.

Automatic Defrosting

Explanation of the automatic defrost system.

Care and Maintenance

Cleaning Your Beer Dispenser

Instructions for cleaning the interior and exterior of the unit.

Draught Beer Trouble Guide

Cloudy Beer

Causes and corrections for hazy or unclear beer.

Flat Beer

Off-Taste Beer

Sour Beer

Wild Beer

Tail End Beer

Troubleshooting Guide

Service for Your Beer Dispenser

Avanti Products Warranty

Limited One-Year Warranty

Covers parts and labor for defects for one year.

Limited Second Through Fifth Year Warranty

Covers compressor replacement for years 2-5.

What is Not Covered

Lists items and conditions not covered by the warranty.

Wiring Diagram

Avanti BD6000 Specifications

General IconGeneral
BrandAvanti
ModelBD6000
CategoryBeverage Dispenser
LanguageEnglish

Related product manuals