Avanti MBD5L - User Manual

38 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

Mini Pub

INSTRUCTION MANUAL

MANUAL DE INSTRUCCIONES

Model Number / No. de Modelo:

MBD5L

MINI PUB (5L KEG)

DISPENSADOR DE CERVEZA (5L)

BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING

INSTRUCTIONS.

La sección en español empieza en la página 23

Avanti has a policy of continuous improvement on its products and reserves the right to change materials and specifications

without notice.

Avanti Products, A Division of the Mackle Co., Inc.

P.O. Box 520604 - Miami, Florida 33152

www.avantiproducts.com

Questions and Answers

J
Jennifer CampbellJul 31, 2025
Why is my Avanti Beverage Dispenser not cold enough?
- D
  Danny SampsonJul 31, 2025
  Several factors can cause your Avanti Beverage Dispenser to not get cold enough. Check the temperature control setting and adjust if needed. The external environment may require a higher setting. Avoid opening the door too often and ensure it closes completely. Inspect and replace the door gasket if it doesn't seal properly. Make sure the unit has the required clearances and check the voltage supplied to the unit. Correcting these issues should improve the cooling performance.
T
Tommy WagnerAug 7, 2025
What to do if my Avanti Beverage Dispenser does not operate?
- A
  Amy CombsAug 7, 2025
  If your Avanti Beverage Dispenser isn't operating, start by checking if the AC or DC adapter is properly plugged in. Also, inspect the circuit breaker and replace the fuse if necessary. These steps should help restore power to the unit.
J
jadamsAug 15, 2025
What to do if the light does not work on my Avanti MBD5L?
- D
  Daniel JacksonAug 15, 2025
  If the light in your Avanti Beverage Dispenser isn't working, first ensure the unit is plugged in. Then, check the circuit breaker and replace the fuse if needed. Finally, make sure the light button is turned to the “ON” position.
L
lauravalentineAug 22, 2025
How to stop vibrations in my Avanti Beverage Dispenser?
- A
  Andrew RubioAug 22, 2025
  To stop vibrations in your Avanti Beverage Dispenser, check to assure that the unit is level.

Summary

Important Safety Instructions

Basic Safety Precautions

Essential precautions to reduce the risk of fire, electrical shock, or injury when using the appliance.

Understanding Safety Alert Symbols

Important Safeguides

Pre-Operation and Installation Safety

Covers proper positioning, installation, and electrical connection safety for the Mini Pub.

Operational and Environmental Safeguides

Guidelines for safe operation, ventilation, temperature, electrical supply, and handling.

INSTALLATION INSTRUCTIONS

Before Using Your Mini Pub

Pre-Operation Guidelines

Electrical Connection

Grounding and Outlet Requirements

Ensuring proper grounding, outlet type, and cord safety for electrical connection.

Cord Handling and Maintenance

Guidelines for securing the power cord and handling damaged cords to prevent hazards.

Installation of Your Mini Pub

Unit Placement and Setup

Dispenser and Power Connection

Preparing the Keg

Setting up the Keg

Setting up the Gas Cartridge

Adjusting the Gas Pressure

Gas Pressure Settings by Beer Type

OPERATING YOUR MINI PUB

Temperature Setting and Control

Dispensing Your Beer

Step-by-step guide on how to properly dispense beer into a glass.

CARE AND MAINTENANCE

Keg Removal and Cleaning

Cleaning Beer Lines

Troubleshooting Guide

Common Appliance Problems

Guide to identify and resolve common problems with the appliance.

DRAUGHT BEER TROUBLE GUIDE

Troubleshooting Cloudy Beer

Troubleshooting Flat Beer

Causes and corrections for foamy head disappearing quickly or lack of zest in beer.

OFF-TASTE BEER

Identifying and Correcting Off-Tastes

Causes and corrections for beer tasting bitter, bitey, or having unpleasant odors.

SOUR BEER

Causes of Sour Beer

Factors leading to sour beer, such as contaminated air lines or improper barrel transportation.

WILD BEER Troubleshooting

Pressure, CO2, and Old Beer Issues

Addressing pressure, CO2 levels, and the impact of old beer on wild beer.

TAIL END BEER Issues

Flat Beer at Barrel End

SERVICE FOR YOUR APPLIANCE

Avanti Customer Service Information

Summary

Important Safety Instructions

Basic Safety Precautions

Essential precautions to reduce the risk of fire, electrical shock, or injury when using the appliance.

Understanding Safety Alert Symbols

Important Safeguides

Pre-Operation and Installation Safety

Covers proper positioning, installation, and electrical connection safety for the Mini Pub.

Operational and Environmental Safeguides

Guidelines for safe operation, ventilation, temperature, electrical supply, and handling.

INSTALLATION INSTRUCTIONS

Before Using Your Mini Pub

Pre-Operation Guidelines

Electrical Connection

Grounding and Outlet Requirements

Ensuring proper grounding, outlet type, and cord safety for electrical connection.

Cord Handling and Maintenance

Guidelines for securing the power cord and handling damaged cords to prevent hazards.

Installation of Your Mini Pub

Unit Placement and Setup

Dispenser and Power Connection

Preparing the Keg

Setting up the Keg

Setting up the Gas Cartridge

Adjusting the Gas Pressure

Gas Pressure Settings by Beer Type

OPERATING YOUR MINI PUB

Temperature Setting and Control

Dispensing Your Beer

Step-by-step guide on how to properly dispense beer into a glass.

CARE AND MAINTENANCE

Keg Removal and Cleaning

Cleaning Beer Lines

Troubleshooting Guide

Common Appliance Problems

Guide to identify and resolve common problems with the appliance.

DRAUGHT BEER TROUBLE GUIDE

Troubleshooting Cloudy Beer

Troubleshooting Flat Beer

Causes and corrections for foamy head disappearing quickly or lack of zest in beer.

OFF-TASTE BEER

Identifying and Correcting Off-Tastes

Causes and corrections for beer tasting bitter, bitey, or having unpleasant odors.

SOUR BEER

Causes of Sour Beer

Factors leading to sour beer, such as contaminated air lines or improper barrel transportation.

WILD BEER Troubleshooting

Pressure, CO2, and Old Beer Issues

Addressing pressure, CO2 levels, and the impact of old beer on wild beer.

TAIL END BEER Issues

Flat Beer at Barrel End

SERVICE FOR YOUR APPLIANCE

Avanti Customer Service Information

Avanti MBD5L Specifications

General

Capacity	5 liters
Type	Beverage Dispenser
Material	Plastic
Color	Black
Warranty	1 Year Limited
Dispensing Mechanism	Push-button

Related product manuals