EasyManua.ls Logo

Avanti X-FIT 2P - User Manual

Avanti X-FIT 2P
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
USER’S MANUAL
X-FIT 2P
MOTORIZED TREADMILL
MODEL NUMBER: X-FIT 2P
USER WEIGHT LIMITATION: 136kgs. (300lbs.)
SERIAL NUMBER (found on frame):
Question and Answer IconNeed help?

Do you have a question about the Avanti X-FIT 2P and is the answer not in the manual?

Summary

Precautions

Power Requirements

Electrical Grounding and Surge Protection

Ensuring proper electrical grounding and recommending surge protectors for safe treadmill operation.

Pre-Assembly Steps

User Weight Limitation

Specifies the maximum user weight capacity for safe operation of the treadmill.

Reset Button Functionality

Explains the location and purpose of the reset button for power surge protection.

Hardware Comparison Chart

Parts List

Parts List (Continued)

Parts Diagram

Parts Diagram (Continued)

Assembly Instructions

Step 1: Attach Uprights

Remove treadmill from carton and secure Left and Right Uprights using M8 x 15mm Bolts.

Assembly Instructions (Continued)

Step 2: Attach Console Support Tube

Attach the Console Support Tube to the Right Upright using the Console Support Fixing Screw.

Assembly Instructions (Continued)

Step 3: Attach Top Console Housing

Secure the Top Console Housing to the uprights using two M6 x 15mm Screws.

Assembly Instructions (Continued)

Step 4: Attach Cross Brace and Tighten Bolts

Attach Cross Brace using Metal Caps and M8 x 78mm Bolts; tighten M8 x 76mm Allen Head Bolts.

Assembly Instructions (Continued)

Step 5: Attach Handlebars

Connect handlebar wires and attach Left and Right Handlebars using M8 x 19 Handlebar Fixing Bolts.

Assembly Instructions (Continued)

Step 6: Attach Handlebar Rear End Caps

Attach Handlebar Rear End Caps to Left and Right Uprights using specified screws.

Assembly Instructions (Continued)

Step 7: Attach Plastic Covers

Attach one Plastic Cover to each Upright using one M6 x 15mm Screw for each.

Folding Instructions

How to Fold the Treadmill Deck

Step-by-step guide on how to safely fold the treadmill deck for storage.

Unfolding Instructions

How to Unfold the Treadmill Deck

Step-by-step guide on how to safely unfold the treadmill deck for use.

Transport Instructions

How to Transport the Treadmill

Instructions for safely folding, tilting, and moving the treadmill using its wheels.

Maintenance

General Maintenance and Important Notes

Guidelines for cleaning, inspecting parts, and avoiding damage to the treadmill.

Belt Adjustment Procedures

Instructions for centering and tightening the walking belt to prevent slipping or damage.

Maintenance (Continued)

Cleaning and Care Guidelines

Procedures for cleaning the treadmill, including warnings and recommended cleaning agents.

Deck Lubrication Procedure

Steps for lubricating the walking board and belt for optimal performance.

Important Steps Before Exercising

Pre-Exercise Consultation and Preparation

Consult physician, start slowly, wear appropriate clothing, and maintain equipment.

Target Heart Rate Guide

Finding and Monitoring Your Pulse

How to manually check your pulse and understand target heart rate zones.

Target Heart Rate Chart

A chart correlating age with target heart rate zones for different fitness levels.

Muscle Chart

Stretching Routine

Warm-up and Cool-down Exercises

Guidance on warming up and cooling down to prepare for and recover from exercise.

Stretching Routine (Continued)

Specific Stretching Exercises

Detailed instructions for performing hamstring, inner thigh, side, and calf stretches.

Avanti X-FIT 2P Specifications

General IconGeneral
Motor Power2.0 HP
Maximum User Weight120 kg
Heart Rate MonitoringHand pulse sensors
FoldableYes
Weight Capacity120 kg
FoldingYes
DisplayLCD
Programs12 preset programs

Related product manuals