Owner’s Manual
13
Pre-Ride Checklist (cont’d)
Before Starting the Engine/Motor (cont’d)
13 Guards
a
Check all guards converting all rotating parts, including the clutch.
b
Tighten loose guards. Replace worn or damaged guards as
necessary.
After Starting the Engine/Motor
1 Stop switch
Perform stop switch test. Repair/replace as necessary.
2 Throttle
Check idle speed. Adjust as necessary.
3 Brakes
Perform brake test. Adjust as necessary.
After Completing the Inspection
Correct any discrepancies according to this Operator's Manual before
riding. If you cannot correct the problem, contact an authorized dealer for
assistance or call (626) 336-1128 for Customer Service.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
WARNING! NEVER OPERATE THE VEHICLE WITH ANY KNOWN
DISCREPANCIES. WORN/DAMAGED/MISSING COMPONENTS COULD
LEAD TO DEATH, SERIOUS INJURY, AND/OR PROPERTY DAMAGE TO
YOURSELF AND/OR OTHERS.
To Next Page
Loading...
General