Owner’s Manual
19
Operation (cont’d)
Kickstarter
Use the kickstarter to start the engine
if the battery is drained. Once started,
leave the engine running until the
battery recharges sufficiently to
restart the scooter. This option is not
available on electric-powered
scooters.
Left brake/switch
assembly
z
High/low beam light
switch (1):
To activate
the high beam, move
the switch to position
(2). For low beam, use
position (3). You can
flash the high beam
(such as during
passing) by pushing the
light switch down and
releasing it.
z
Turn signal switch (4):
Slide the switch plate
left for a left signal and right for a right signal. Press the center of the
switch to cancel the turn signal.
z
Horn (5):
Press the bottom button to sound the horn.
2
3
1
4
5
To Next Page
Loading...
General