2
1
When installing,
L to L,R to R
- 08 -
Step 4. Install the rear derailleur protecting rack
Step 5. Install pedals
1. Identify the correct side by finding the marked ‘R’ and ‘L’ at the pedals. Each pedal has an “L” sticker or “R” sticker to indicate left or right side of the eBike.
2. To install the left “L” pedal, carefully hand-screw it in, counter-clockwise direction. Repeat it to install the right “R” pedal by turning clockwise.
IMPORTANT: If the pedal does not turn smoothly into the crank, do not force it. Take it back out and try again until it goes in smoothly.
PLEASE NOTE: If after riding, the threads on your crank is stripped. You don’t have to follow this instruction. Your crank needs replacing (this is NOT
covered by warranty).
To Next Page
