Avatar EMK-25 - Basic Function; Power On and USB Connection; Menu Navigation and Operation; Program Selection and Presets

BASIC FUNCTION
1. Power On
◇ USB Port: Use the USB cable to connect this port to a USB port on your computer.
The computer's USB port will provide power to EMK-25. This connection is also used to
send and receive MIDI data to and from your computer.
◇ Optional Batteries Powered: Use 3 AA alkaline batteries, cooperate with the BT
function to get wireless connection with the software on iPad/iPhone/iPod touch/
Mac, no driver, no wire and OTG required.
◇ If use the USB connection and battery at the same time, USB power supply will be
the priority.
2. Menu
◇ Press MENU button to enter menu page.
◇ Press UP/DOWN button to switch the list.
◇ Turn the Selection knob to adjust parameter.
◇ Press OK button to save.
3. Program Select
◇ 20 preset parameter groups include 12 user presets and the preset for Cubasis,
Cubase, Garageband, Chrona Pads, Major Pads, FL Studio, Logic Pro X, and Ableton
Live. All the presets are editable, but they can't be renamed.
4. Joystick
◇ Move left or right to adjust the pitch.
◇ Move up or down to send MIDI message for modulation, default as CC#1.
5. Assignable Knob
◇ Each 270° knob sends a MIDI CC message.
◇ Each knob supports to select CC or Aftertouch mode and set the MIDI Channel in menu.
5