Avatar EMK-25 - Restore Factory Settings; Frequently Asked Questions (FAQ); Redeem Cubase LE Download Code; Connect via Bluetooth (BT)

RESTORE FACTORY SETTINGS
In standby mode—do not enter MENU, hold down OK button for 5s, the reset dialog box
will pop up, please scroll the selector knob to select Yes, at last press OK button to confirm.
You can also select No for dialog box to cancel, then press the OK button to exit this reset.
FAQ
How to redeem your download code for Cubase LE?
1. Go to https://www.steinberg.net/cubase/le/, click 'GET CUBASE LE NOW';
2. Choose Steinberg Download Assistant for your platform;
3. Run the 'Steinberg Download Assistant' and click 'My account', register a Steinberg
ID and sign in, input the download access code included with your AVATAR midi
keyboard, now you are able to install Cubase LE.
How to Connect the BT?
1. Please press BT button on the EMK-25 and the indicator light will flash rapidly.
2. Enter the iPad/iPhone/iPod touch/Mac’s SETTING interface, open the bluetooth
function.
3. Start the application on any of the above devices, and then make the appropriate
wireless connection settings. If this connection is successful, the light will keep on.
Take Cubase for example
1.Open Cubase application;
2.Click the ‘SETUP’ in the upper right corner;
3.Click ‘MIDI’;
4.Click ‘Host’ under the ‘MIDI over Bluetooth’;
5.Choose ‘MIDIkeyBoard-01’;
6.Wait for ‘Not Connected’ to become ‘Connected’.
Tip:
The EMK-25 is not visible in the Settings menu of iOS system. It is visible only in
applications that support Bluetooth MIDI.
How to adjust the velocity curve of keybed or drum pads?
1. Please press MENU button to enter menu.
2. Press KEYBED button or hit the drum pad to select it.
3. Press DOWN button to switch to Curve, there are Soft, Normal, Heavy and Max,
four modes for selecting.
4. Use the Selection knob beside the screen to select the curve you want.
5. Press OK button to save.
10