9
Caleffi
1/2 valve
Please pace the fittings directly on the valve and press hard to make the fittings and the
valve jam.
Giacomini
1/2 valve
Giacomini 1/2 needs to install the short ejector rod accessory to the bottom of the
controller, please put the accessories directly on the valve and press hard to make the
accessories and valve stunk, and then screw into ME167 driver.
TRV network paring:
Rotate the knob to adjust the temperature of the “OF” state, press and hold the knob for 5
seconds to enter the network configuration mode, WIFI “ ” icon start fast flashing, then
connect it with zigbee gateway as the following instruction.
Gateway distribution network
Green light one and red light fast flashing, and it has entered the state of network
distribution. (Refer to operating instructions of the gateway for the network configuration
status of the gateway.)
To Next Page
Loading...