Installing the upgrade memory kit in the
G450 and G430 Media Gateway
Important:
Always check the Avaya Support Website for Product Support Notices at http://www.avaya.com/
support and select Communication Manager > Product Support Notices.
This Job Aid describes the steps required to install the upgrade memory kit components in the
Avaya G450 and Avaya G430 media gateways.
The upgrade memory kit enables increasing the number of announcement files on the gateway from
256 to 1024, by storing them on a removable compact flash. This also increases the total amount of
announcement time from 45 minutes to four hours. Since the announcements are played from RAM,
you must also increase RAM. The upgrade memory kit consists of:
• 1 GB compact flash memory card
• One RAM card. Use the RAM card applicable to your gateway, as detailed below
Related links
Equipment ordering on page
1
Equipment ordering
When ordering the upgrade memory kit, quote the relevant comcodes from the following:
Upgrade memory kit versions Comcode
1.x 700510107
2.x and 3.x 700476419
Related links
Installing the upgrade memory kit in the G450 / G430 Media Gateway on page 1
©
2014-2018, Avaya, Inc.
All Rights Reserved. 1
To Next Page
Need help?
General
