132 Avaya 374x DECT Telephones - User Guide 02/2016
Handover
During call, all ongoing handovers in the IP-DECT system can be displayed by selecting Traffic
> Handover in the Master.
Backup
The IPBS/IPBL configuration can be downloaded and saved on a disc or a server. This is useful
when identical configuration should be applied to several IPBSs/IPBLs, for example when
configuring the Radios in a system. For information on how to load a saved configuration on the
IPBS/IPBL, see System Downgrade for IPBS2 and DB1
on page 132.
1. Select Backup > Config.
2. Click "download".
3. Click "download with standard password" to save the configuration with the default system
password.
4. Click "Save" in the dialogue window and browse to the place where the configuration
should be saved.
5. Click "Save".
System Upgrade from Software Version 4.x.x to 5.0.x
Radios with software version 4.x.x will not be able to connect to a Master with software version
5.0.x. It is therefore recommended when doing a manual upgrade (i.e. when not using an
update server) to upgrade Radios first and then the Master.
System Downgrade for IPBS2 and DB1
This section applies only to IPBS2 and DB1 with the following article numbers that can be found
on the label on the backside of the device:
l IPBS2-**A
l DB1-**A
Handover Canceled The number of failed handovers in the Radio.
NOTE: There can be several reasons for
uncompleted handovers occuring. This will in most
cases not cause dropped or disconnected calls.
To Next Page
Loading...
