Avaya Virtual Services Platform 7000 Series - SFP Port Leds

Vendor Model Details
HP 487963–B21 HP Blade Systems C-Class SFP+ direct attach
cable — 5 m
If you use a verified third party device, the show
interface gbic command output displays
the vendor SEEPROM data and the cable type.
Note:
The
SEEPROM data output for third party cables might be different than the model number.
Avaya devices are recommended to provide maximum compatibility and support for the VSP
7000 Series.
Related topics:
SFP port LEDs on page 62
Installing SFP transceivers on page 63
SFP port LEDs
The
switch front panel contains transmit (Tx) and receive (Rx) LEDs for each port. The following
table describes the SFP port LED status.
LED State Description
Tx Off No SFP or SFP+ transceiver
detected.
Emerald (Solid) SFP+ detected and link
established.
Emerald (Flashing) SFP+ link established and
transmitting.
Amber (Solid) SFP detected and link
established.
Amber (Flashing) SFP link established and
transmitting.
Amber (Blinking) Tx and Rx blink slow
indicating port is disabled.
Rx Off No SFP or SFP+ transceiver
detected.
Emerald (Solid) SFP+ detected and link
established.
Emerald (Flashing) SFP+ link established and
receiving.
Preparations for network connectivity
62 VSP 7000 installation July 2013
Comments? infodev@avaya.com