To Next PageTo Next Page
Need help?Do you have a question about the Avaya ERS 4548GT-PWR and is the answer not in the manual?
General| Model | ERS 4548GT-PWR |
|---|---|
| Switching Capacity | 176 Gbps |
| Layer | Layer 2/3 |
| Rack Units | 1U |
| Management | Web-based, CLI, SNMP |
| MAC Address Table Size | 16K |
| Manageable | Yes |
| Operating Humidity | 10% to 90% non-condensing |
| Power over Ethernet (PoE) | Yes, IEEE 802.3af/at |
| Jumbo Frame Support | Yes, up to 9, 216 bytes |
| Features | VLANs, QoS, Link Aggregation |
| VLAN Support | Yes, up to 4094 VLANs |
| Layer 3 Features | Static routing, RIP, OSPF |
| Power Supply | Internal, AC |
| Operating Temperature | 0°C to 45°C |
| Port Configuration | 48 x 10/100/1000Base-T ports, 4 x SFP ports |
| Redundancy | Yes, with redundant power supply options |
Command syntax and options for configuring traffic-profile filter sets.
Addresses common issues like resource exhaustion, block formation, and interface capabilities.
Procedure for configuring interface shaping parameters for ports.
Procedure for creating egress queue shapers on interfaces.
Example of remarking traffic and metering based on port and IP destination.
Example of remarking traffic with meter and additional remarking.
