Avaya ERS 4548GT-PWR User Manual

Avaya Inc. – External Distribution
34
avaya.com
September 2015
5.3.3 Port Shaper
Assuming we wish to accomplish the following:
 Setup up a port shaper to 40 Mbps with a burst of 80 Mbps for 10 seconds on egress port 25
1
Traffic classifier configuration using name of one
interface fastEthernet 25
qos if-shaper name 40M shape-rate 40000 max-burst-rate 80000 max-burst-duration 10000
exit

Avaya ERS 4548GT-PWR Specifications

General

Model	ERS 4548GT-PWR
Switching Capacity	176 Gbps
Layer	Layer 2/3
Rack Units	1U
Management	Web-based, CLI, SNMP
MAC Address Table Size	16K
Manageable	Yes
Operating Humidity	10% to 90% non-condensing
Power over Ethernet (PoE)	Yes, IEEE 802.3af/at
Jumbo Frame Support	Yes, up to 9, 216 bytes
Features	VLANs, QoS, Link Aggregation
VLAN Support	Yes, up to 4094 VLANs
Layer 3 Features	Static routing, RIP, OSPF
Power Supply	Internal, AC
Operating Temperature	0°C to 45°C
Port Configuration	48 x 10/100/1000Base-T ports, 4 x SFP ports
Redundancy	Yes, with redundant power supply options