Need help?Do you have a question about the Avaya ERS 3550T-PWR+ and is the answer not in the manual?
General| Model | ERS 3550T-PWR+ |
|---|---|
| Ports | 48 x 10/100/1000 BASE-T |
| Power over Ethernet | Yes |
| Uplink Ports | 4 |
| SFP Ports | 4 |
| PoE Budget | 370W |
| Switching Capacity | 176 Gbps |
| Rack Units | 1U |
| Operating Temperature | 0 to 50 °C |
| Power Supply | Internal |
| VLANs Supported | 4094 |
| Jumbo Frame Support | Yes |
| Weight | 3.5 kg |
| Type | Managed |
| Management | CLI, SNMP |
| MAC Address Table Size | 32K |
| Dimensions | 440 x 44 mm |
| Operating Humidity | 10% to 90% (non-condensing) |
Explanation of Avaya Command Line Interface (ACLI) modes and usage for switch management.
Guides on using the install command or EDM Quick Start for initial switch configuration.
Details on using BootP for automatic IP address assignment and switch management.
Information on stacking features, capabilities, and configurations for supported switch models.
Information on the AUR feature for replacing stack units while retaining configuration.
Steps to connect a terminal to the console port for switch management.
Procedure to configure terminal settings for speed and display preferences.
Procedure to set IP address, subnet mask, and boot mode for the switch.
Enabling remote access via Telnet for switch management.
Details on configuring Telnet connection parameters for switch management.
Procedure to reset the switch to its factory default configuration.
Automating switch configuration for Converged IP Telephony solutions using IPOffice script.
Automatic saving of configuration and logs to flash memory.
Synchronizing switch clock to Universal Coordinated Time (UTC) with SNTP servers.
Using ACLI commands for Auto Unit Replacement (AUR) configuration.
Managing and configuring Agent Auto Unit Replacement (AAUR) functionality.
Configuring the switch to utilize energy more efficiently using Avaya Energy Saver.
Explains the switch's autosensing and autonegotiation capabilities for port speed and duplex.
Procedure to enable or disable a switch port using ACLI.
Configuring the power detection method for devices connected to PoE ports.
Setting the PoE budget mode to Low Power Budget (Fanless) or High Power Budget (Normal).
Procedure to upgrade switch and diagnostic images using ACLI.
Safely shutting down the switch without corrupting the software image.
Performing Quick Start setup via a single screen in EDM.
Configuring Telnet, SNMP, Web, and SSH access settings via EDM.
Automating switch configuration for Converged IP Telephony solutions using IPOffice script.
Configuring one or more interface ports, including name, status, speed, and duplex.
Enabling or disabling Auto Unit Replacement (AUR) on the switch via EDM.
Changing the software version running on the switch via EDM.
Configuring Simple Network Time Protocol (SNTP) settings via EDM.
Configuring Avaya Energy Saver (AES) for switches or stacks via EDM.
Example of setting up VLANs for voice and data traffic on the Avaya 3526T-PWR switch.
To Next Page
